What do I have to Gain
Pay close attention to the entire lesson “Gain in the NPN Transistor”
The information in table L47-1 is worth the time it will take to
understand.
| 1. |
As I sit here writing, I see that my reference to the “Circuit Text
DMR 2900” is in error. You most likely aren’t using that model because
it was discontinued in March 2005.
Diode Testing is a feature common to most multimeters. Look
for the “Diode Symbol” on the dial. The measurements and outputs
for good transistors will remain the same. A reading of .68 on one
DMM will be the same on another DMM. |
2.a)
2.a)
3.
4. Current throughout the entire leg of a system is always
the same.
5. Go ahead and set it up. Use any two resistors that are in
the same range.
i.e. 10,000 ohm and 22,000 ohm or
10,000 ohm and 47,000 ohm
6. Refer to how results were obtained in table 47 - 1
|
