Electronic Circuits for the Evil Genius - Errors and Corrections - 4017 decade counter Reset and Enable
 
chip logo
forum
Electronic Circuits for the evil genius
Tab Robo Logo
Home | About EC for the EG |  Links
 Contact Mr Cutcher | Site Map
Errors & Corrections
Lesson 38
     
  1. Wrong Word 
  2. Wrong Resistor
  1. On pages 144, Column 2, an error in wording regarding "Enable" instructions.
    • 1. Remove the reset probe wire.
    • 2. ... What does the "ENABLE" do when it is set high for a moment. 
    • 4.  What happens if you keep the "ENABLE" hi and start the rolldown?
  2. On page 145, Column 2 3'rd Line.  Should Read 10K ohm Resistor.